Specifications:

The robot should fit in a box of dimension 30 cm x 30 cm x 30 cm (l x b xh) at any given point in the match. The robot should not exceed 3 kg of weight.

Robot Control Requirements:

The competition is only for autonomous robots, no manual robot will be permitted to enter.

Battery and Power:

The robot can be powered electrically only. The electric voltage between 2 points anywhere in the robot should not be more than 20 V DC at any point of time. All efforts must be made to protect battery terminals from a direct short and causing a battery fire, failure to do so will cause direct disqualification. Use of damaged, non-leak proof batteries may lead to disqualification Change of battery will not be allowed during the match.

Rules:

Bot should not damage the track, if it is considered to be damaging one then the team will be disqualified. The participants should not touch the bot when it’s on the track. Any kind of activity (repairing, battery handling, etc.) which may cause damage to the surroundings during the stay of the teams in the competition area should not be carried out without the consent of organizers. Not following this rule may result in disqualification

Team Specification:

A team may consist of a maximum of 2 participants. These participants can be from same or different institutes. Organizer reserves the right to reject entries from any Team whose name it deems inappropriate, offensive or conflicting. Each team must specify their Team Representative (Leader) at the time of registration on the website. All-important communications between organizer and the registered teams will be done through Team Representative. The Team Representatives must submit valid contact details (phone no., email ID etc.) at the time of registration.

Specifications:

In the soccer challenge, a team compete against another team in matches Participants of this challenge are required to give the best of their abilities in programming, robotics, electronics and mechatronics All are expected to compete, learn, have fun and grow.

Robot Control Requirements:

The competition is only for manual robots.

Regulation:

A team consists of maximum four members Teams that do not abide by the rules are not allowed to participate the referee can interrupt a game in progress if any kind of interference from spectators is suspected Robots that do not abide by the specifications/regulations are not allowed to play. If violations are detected During a running game the team is disqualified for that game. If similar violations occur repeatedly, the team can be disqualified from the tournament. During the game, the team members are not allowed to touch the machine or the arena.

Robot Specification:

All dimensions in centimeters Maximum robot size-30x30x20cm Game ball of size similar to tennis ball will be used for the competition Power supply to the robots should not exceed 12V Bot should be of maximum 4kg by weight Control of the bot may be wired or wireless Actuation mechanism may be motorized for kicking the ball(Pneumatic supply is not allowed)

Scoring formula:

Teams should score goals in the given time so as to win the match Goal scored after the whistle will not be counted If the game ends up with tie Penalty shots are suggest by referees Disqualification Failure to do so will lead to disqualification

Team Specification:

A team may consist of a maximum of 2 participants. These participants can be from same or different institutes. Organizer reserves the right to reject entries from any Team whose name it deems inappropriate, offensive or conflicting. Each team must specify their Team Representative (Leader) at the time of registration on the website. All-important communications between organizer and the registered teams will be done through Team Representative. The Team Representatives must submit valid contact details (phone no., email ID etc.) at the time of registration.

What is Drone?

Drone is an unmanned Ariel vehicle (UAV) serve a variety of purposes, such as recreational, photography, commercial and military, their two basic functions are flight and navigation. To achieve flight, drones consist of a power source, such as battery or fuel, rotors, propellers and a frame. The frame of a drone is typically made of lightweight, composite materials, to reduce weight and increase maneuverability during flight. Drones require a controller, which is used remotely by an operator to launch, navigate and land it. Controllers communicate with the drone using radio waves, including wi-fi.

General Instructions:

School students can participate in this event; certificate will be provided for participation. Cash Prize will be provided only if more than 5 teams have registered. Each team is required to construct a single drone. The maximum number of students in a team is 4. Each member must produce a valid ID card on registration desk. The weight or size of drone is not limited criteria. You should bring your own battery and other accessories. Power supply with extension cable will be provided by institution and the organizing teams do-not provide any extra components. At the start of the task, the drone will be placed at the starting point, should cross the hurdles in the design layout and then would reach the target location in stipulated time. Only 2 team members are allowed to be near the field while starting the drone. The starting procedure of the drone should be simple and should not crash with other drone or people involved. The flight should be away from spectators that are controlled by drone operators to be safely landed on target surface. The decision of the coordinators will be final and binding upon any participants. Number of rounds for the event depends on number of participants and the prizes will be given based on top three best performing teams in the event. Kongu Engineering College students can participate in the event and will be provided with participation certificate.

Team Specification:

A team may consist of a maximum of 2 participants. These participants can be from same or different institutes. Organizer reserves the right to reject entries from any Team whose name it deems inappropriate, offensive or conflicting. Each team must specify their Team Representative (Leader) at the time of registration on the website. All-important communications between organizer and the registered teams will be done through Team Representative. The Team Representatives must submit valid contact details (phone no., email ID etc.) at the time of registration.